Breadcrumbs

Main Screen Operations

The functions of the icons displayed on the main screen are as follows:


Icon

Name

Function
image-20230227-063532.png


Menu Button

Displays the menu
image-20230227-063708.png


Display split switching button

Each time you tap this, you can switch the display between split and no split (between fullscreen and two-split display).
image-20230227-063715.png


GNSS status button

By tapping this, the GNSS status code information is displayed.
image-20230227-063727.png


Cutting edge position measurement button

By tapping this, the view changes to the measurement screen fot the cutting edges position.
image-20230227-063746.png


Set target surface offset button

By tapping this, the view changes to the Offset Settings screen for the target serface. After setting, the offset surface from the selected slope is displayed.
image-20230227-063752.png


View switching button

Displays the view switching screen.
image-20230227-063758.png


Left button

The distance and angle to the slope and the cutting edge position can be switched to the left when viewed from the operator.
image-20230227-063806.png


Center button

The distance and angle to the slope and the cutting edge position can be switched to the center when viewed from the operator.
image-20230227-063815.png


Right button

The distance and angle to the slope and the cutting edge position can be switched to the right when viewed from the operator.
image-20230227-063820.png


Add topography measurement button

Records the current cutting edge position. By tapping this, the measured point is added to the Topography Measurement List screen.
image-20230227-063826.png


Select Target Surface TIN (Triangulated Irregular Network) button

By tapping this, the view changes to a full-screen Select Target Surface TIN view. Once the selection is completed, the screen returns to the original screen. Selected TINs and two or more TINs in the specified range of angles are selected.
image-20230227-063833.png


Mini map button

By tapping this, a mini map is displayed that gives you a birds’s eye view of the entire worksite.
image-20230227-063838.png


Target surface offset value settings button

The virtical offset value of the target value can be increased or decreased.
image-20230227-063843.png


Facing angle compass

The rotation angle required to face (head-on) the target surface is displayed on the gauge.
image-20230227-063849.png


Display the bucket bottom rotation angle

Displays the rotation angle required to make the bottom of the bucket parallel to the target surface.
image-20230227-063856.png


Display the distance to the cutting edge

Displays the distance drom the target surface to the cutting edge.
image-20230227-063903.png


Subwindow display 1

By tapping this, the subwindow is displayed. Allows turning on or off a display element on the subwindow
image-20230227-063909.png


Subwindow display 2

By tapping this, the subwindow is displayed. On the subwindow the roll and pitch angles, bucket bottom rotation angle and distance to the cutting edge of the machine cna be displayed
image-20240207-080555.png


Tilt IMU warning

Displayed when the bucket is in a position where accuracy is compromised due to the roll of the bucket. Curl the bucket to improve accuracy.